HP Compaq Presario,Presario 8000 Getting Started page 101

Hardware Installation (Continued)
Symptom
A new device is not
recognized as part
of the system.
(Continued)
Getting Started
Problem
Power switch of new
device is not turned on.
When the system advised
you of changes to the
configuration, you did
not accept them.
A Plug and Play card
may not automatically
configure when
added if the default
configuration conflicts
with other devices.
Solution
Turn off the PC, turn on the external device, and then
turn on the PC to integrate the device with the PC
system.
Restart the PC, and follow the instructions for accepting
the changes.
Deselect the automatic settings in the operating system
for the card, and choose a basic configuration that
doesn't cause a resource conflict.
You can also use PC Setup to reconfigure or disable
devices to resolve the resource conflict.
Finding Help & Support
7–15