HP Compaq Presario,Presario 8000 Getting Started page 138

Upgrading the PC
To Remove an Expansion Card
1. Complete the procedure described in
"Preparing the PC" on page 8–2, but do not
remove the front bezel.
❏ To remove an expansion card from the
S series, continue to step 2.
❏ To remove an expansion card from the
8000 series, skip to step 3.
2. On the S series, on the rear of the PC, remove
the expansion bracket covering the expansion
slots by removing the screw from the bracket
cover 1, and then remove the expansion
bracket cover 2.
8–22
Removing the screw and expansion bracket cover
on the S series
Getting Started