Example Of Connecting With Personal Computers - Panasonic DLP PT-D12000E Operating Instructions Manual

Example of connecting with personal computers

IN OUT
REMOTE 1 REMOTE 2 IN
IN
OUT
VIDEO S-VIDEO IN
Attention
• When the main power of the main unit is turned off, also turn off the power of the PC.
• When the length of the cable from a PC to the projector is long or when there are many relay devices such as
switches, the video may be interrupted or fuzzy. In such a case, use a cable compensator.
Note
• For the specifications of the RGB signals that can be applied from the PC, see the data sheet on pages
122-123.
• If your PC has the resume feature (last memory), the computer may not function properly until the resume
capability is disabled.
• When using the DVI-D input, EDID settings may be required for the connected device. (pp. 73, 74)
Control PC
Control PC
RS-232C IN RS-422 IN
SERIAL
R/P G/Y B/P
R B
SYNC/HD VD
RGB 1 IN RGB 2 IN
I/F
PC PC
To 2nd projector
(SERIAL IN terminal)
RS-422 OUT
LAN
DVI-D IN
PC
Control PC
ENGLISH – 29