Panasonic PT-D10000 Operating Instructions Manual page 20

Installation (continued)
Adjusting the feet
The four adjustable feet mounted at the bottom of the projector are level-adjustable (0 mm–15 mm) which can be
used when the floor surface is not horizontal.
Projection scheme
This projector can use any of the four projection schemes. Select the most suitable scheme to the situation of your
location. Use the OPTION menu on the menu screen to choose the desired projection scheme. (p. 76)
Installation geometry
When planning the projector and screen geometry, refer to the figures below and the information on the next page
for reference. After the projector is roughly positioned, picture size and vertical picture positioning can be finely
adjusted with the powered zoom lens and lens shifting mechanism.
● ●
When attaching an optional ceiling When attaching an optional ceiling
mount bracket (ET-PKD100H) mount bracket (ET-PKD100H)
Side View Side View
H H
H H
Screen Screen
L: L: Projection distance SW: Image width Projection distance SW: Image width
SH: Height of the image H: SH: Height of the image H:
* For PT-D10000U: * For PT-D10000U:
For PT-DW10000U: For PT-DW10000U:
* However, if the ET-D75LE5 has been installed, the value * However, if the ET-D75LE5 has been installed, the value
will be fixed at H=SH/2 for both the PT-D10000U and will be fixed at H=SH/2 for both the PT-D10000U and
PT-DW10000U. If the ET-D75LE6 has been installed, PT-DW10000U. If the ET-D75LE6 has been installed,
the values will be H = 0.1 × SH to 0.9 × SH for the the values will be H = 0.1 × SH to 0.9 × SH for the
PT-D10000U, and H = 0 to SH for the PT-DW10000U. PT-D10000U, and H = 0 to SH for the PT-DW10000U.
20
– ENGLISH
(Front) (Front)
Floor Floor
Front Front
Rear Rear
(unit : mm/inch) (unit : mm/inch)
L L
254 254
(10˝) (10˝)
L L
Vertical distance between the Vertical distance between the
lens Center level and the bottom lens Center level and the bottom
edge of the projected image edge of the projected image
H = 0 to SH H = 0 to SH
H = -0.1 × SH to 1.1 × SH H = -0.1 × SH to 1.1 × SH
(Rear) (Rear)
Ceiling Ceiling
Top View Top View
L L
Screen Screen
Lens Lens
ET-D75LE1 ET-D75LE1
ET-D75LE2 ET-D75LE2
ET-D75LE3 ET-D75LE3
ET-D75LE4 ET-D75LE4
ET-D75LE5 ET-D75LE5
ET-D75LE6 ET-D75LE6
ET-D75LE8 ET-D75LE8
(unit : mm/inch) (unit : mm/inch)
200 200
(7.9˝) (7.9˝)
L1 L1
175 175
(6.9˝) (6.9˝)
254 254
(10˝) (10˝)
Dimension of L1 (Approx.) Dimension of L1 (Approx.)
62.5 (2.5˝) 62.5 (2.5˝)
47 (1.9˝) 47 (1.9˝)
50.5 (2˝) 50.5 (2˝)
74.4 (2.9˝) 74.4 (2.9˝)
150.5 (5.9˝) 150.5 (5.9˝)
160 (6.3˝) 160 (6.3˝)
202.5 (8˝) 202.5 (8˝)