Table of Contents
Advertisement
Setting
Enable Image
Buffer/Transfer
Trigger
4.
Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer
buffer/transfer (see page 64).
•
Clicking [<Back] takes you back to the previous page.
•
Clicking [Cancel] takes you back to the Trigger page without saving
changes.
Setting
A day of the
week
Active Time of
Trigger
5.
Set the image settings, and click [Next>].
•
Check the box to enable the Trigger setting. Clear the box
to disable it.
•
Selecting [Timer] enables this product to buffer/transfer the
image by timer.
•
Selecting [Alarm] enables this product to buffer/transfer the
image by alarm signal.
•
Selecting [Motion Detection] enables this product to
capture/transfer the images when the motion detects
something.
•
Check the box to enable the day. Clear the box to disable it.
•
Select the [Always] option when you do not specify the time
period. If you specify the time period, select the time period
option and set the time period.
[For assistance, please call: 1-800-272-7033]
Description
Description
Operating Instructions
83
Advertisement
Table of Contents
