Loading Registered Locations Data From A Cd-R; Using Xm Navtraffic Information; Viewing Traffic List - Pioneer AVIC-N3 Operation Manual

Loading registered locations
data from a CD-R
Address Book data stored on a CD-R (-RW) can
be loaded to the navigation system.
This function is used when moving Address Book
data from a Pioneer navigation system with a PC
card slot (e.g., AVIC-88DVD) to a Pioneer naviga-
tion system without a PC card slot (e.g., AVIC-
N3).
❒ When moving data, copy the folder named
"POINT" from the PC card to the personal
computer. Then use the personal computer to
store the "POINT" folder in the first level of
the CD-R (-RW).
1
Insert the CD-R (-RW) to the disc loading
slot.
2
Touch "Settings" in the Main menu, then
touch "System Options".
3
Touch "Read from Disc".
The list of groups appears.
4
Touch the desired group.
5
Touch the desired locations.
Selected locations are marked. To load the
data from other locations, repeat this step.
Alternative option:
Select All:
All the locations are selected (or canceled) at
once.
6
Touch "OK".
The data of the selected locations is stored in
the Address Book.
Using XM NavTraffic Informa-
tion
If you have a GEX-P10XMT XM Digital Satellite
Data & Audio Receiver (sold separately) attached
to the navigation system, and have an active sub-
scription to XM NavTraffic service, you can view
current traffic conditions and information on your
navigation display. When the unit receives
updated traffic information, the navigation sys-
tem will overlay the traffic information on your
map, and also display detailed text information
when available. When you are traveling along a
route and there is traffic information on your cur-
rent route, the system will automatically detect it,
and ask you if you would like to be rerouted. (In
such case, route calculation takes into considera-
tion about 90 mile radius of alternative routes and
its traffic conditions from your current location).
❒ The term "traffic congestion" in this section
indicated the following types of traffic infor-
mation: stop and go, stopped traffic, closed/
blocked roads. This information is always
taken into consideration when checking your
route, and the information related with these
events cannot be turned off. Additionally, the
system also takes into consideration the traf-
fic flow information if "Use the traffic flow
information" is "On".

Viewing traffic list

Traffic Information is displayed onscreen in a list.
This allows you to check how many traffic inci-
dents have occurred, their location, and their dis-
tance from your current position.
Checking all traffic information
1
Touch "Info/Traffic" in the Main menu,
then touch "Traffic Events".
The list with received traffic information is
shown.
53