Returning To The Original Picture Adjustment Values - Pioneer Elite PRO-1010HD Operating Instructions Manual

Picture and Screen Adjustment
3 Use the 5/∞ buttons to select the item (third page
of the menu), then press the SET button.
STANDARD
PICTURE SCREEN
C. MGT RED
C. MGT YELLOW
C. MGT GREEN
C. MGT CYAN
C. MGT BLUE
C. MGT MAGENTA
ENTER
SET
4 Use the 2/3 buttons to adjust picture quality to
the desired setting.
SR + MODE C. MGT RED
SET SET
5
Press the SET button.
Adjustment values are saved, and you return to the
display shown in step 3.
6
After completing settings, press the MENU button
to return to the normal display.
Setting items during video signal and PC signal input
The following functions make finer adjustments to hue by
adjusting each color.
Decrease
C. MGT. RED ... Moves red closer to magenta Moves red closer to yellow
C. MGT. YELLOW ... Moves yellow closer to red
C. MGT. GREEN ... Moves green closer to yellow Moves green closer to cyan
C. MGT. CYAN ... Moves cyan closer to green
C. MGT. BLUE ... Moves blue closer to cyan
C. MGT. MAGENTA ... Moves magenta closer to blue Moves magenta closer to red
Returning to the Original Picture
Adjustment Values
Returning adjusted values to the initial values at the time
of shipment from the factory.
1
Select the INPUT and AV SELECTION mode for the
values you want to return to the initial factory
settings.
38
EN
INPUT1
SETUP OPTION
:
0
:
0
:
0
:
0
:
0
:
0
EXIT
MENU
:
:
0
ON
MENU EXIT
Increase
Moves yellow closer to green
Moves cyan closer to blue
Moves blue closer to magenta
2
Press the MENU button to display the menu.
STANDARD
PICTURE SCREEN
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
MPEG NR
DNR
CTI
PICTURE RESET
SET ENTER
3
Use the 5/∞ buttons to select [PICTURE RESET],
then press the SET button.
STANDARD
PICTURE SCREEN
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
MPEG NR
DNR
CTI
PICTURE RESET
SET ENTER
4 Use the 2/3 buttons to select [YES], then press
the SET button.
All the picture adjustment data for the currently
selected INPUT and AV SELECTION mode is reset to
the initial factory settings, and you return to the
display shown in step 3.
PICTURE RESET?
YES
SET
SET
5
After completing settings, press the MENU button
to return to the normal display.
Note
[PICTURE RESET] only applies to the currently selected INPUT
and AV SELECTION. It cannot be simultaneously applied to
multiple INPUTS and AV SELECTION settings.
INPUT1
SETUP OPTION
:
0
:
0
:
0
:
0
:
0
:
MID
:
MID
:
ON
MENU EXIT
INPUT1
SETUP OPTION
:
0
:
0
:
0
:
0
:
0
:
MID
:
MID
:
ON
MENU EXIT
NO
EXIT
MENU