Other Operations; Setting The Purecinema Mode - Pioneer Elite PRO-1010HD Operating Instructions Manual

Other Operations

Setting the PURECINEMA Mode

Allows even higher fidelity DVD playback of film recordings and
other images.
Note
Make settings individually for each input.
MENU
5/∞
2/3
SET
Display operating panel
1
Press the MENU button to display the menu
screen.
STANDARD
PICTURE SCREEN
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
MPEG NR
DNR
CTI
PICTURE RESET
ENTER
SET
2 Use the 2/3 buttons to select [SETUP].
STANDARD
PICTURE SCREEN
PURECINEMA
CLAMP POSITION
SIGNAL FORMAT
COLOR DECODING
HDMI INPUT
BRT. ENHANCE
ENTER
SET
42
EN
MENU
2/3
SET
5/∞
Remote control unit
INPUT1
SETUP OPTION
:
0
:
0
:
0
:
0
:
0
:
MID
:
MID
:
ON
EXIT
MENU
INPUT1
SETUP OPTION
:
OFF
:
AUTO
:
480p
:
COMPONENT
:
ON
EXIT
MENU
3 Use the 5/∞ buttons to select [PURECINEMA],
and press the SET button.
STANDARD
PICTURE SCREEN
PURECINEMA
CLAMP POSITION
SIGNAL FORMAT
COLOR DECODING
HDMI INPUT
BRT. ENHANCE
ENTER
SET
4 Use the 2/3 buttons to select the desired
[PURECINEMA] mode.
P U R E C I N E M A
SET SET
Status at the time of factory default setting
During 480p and 720p signal input: OFF
During input of a video signal other than those above:
STANDARD
Each time the button is pressed, the screen mode
setting changes as shown:
3 OFF 2
3 ADVANCE 2
¶ OFF ················ [PURECINEMA] function is disabled.
¶ STANDARD ···· When playing DVDs and Hi-Vision
film images recorded at 24 frames/
sec, the recorded data is
automatically detected and
adjustments made to allow optimum
experience of the original beauty of
the film image.
¶ ADVANCE ······ When playing DVDs of film images
recorded at 24 frames/sec, the
recorded video information is
automatically detected and signals
are converted to 72 Hz for playback,
thus recreating the fluid movement
of a movie theater screen, and the
sense of film's true visual quality.
Note
You cannot select [STANDARD] during progressive signal such as
480p or 720p input.
5
Press the SET button.
The [PURECINEMA] function is set and the screen
returns to that shown in step 3.
6
After completing settings, press the MENU button
to return to the normal display.
INPUT1
SETUP OPTION
:
OFF
:
AUTO
:
480p
:
COMPONENT
:
ON
EXIT
MENU
:
OFF
MENU EXIT
3 STANDARD 2