Setting The Orbiter (Orbiter) - Pioneer Elite PRO-1010HD Operating Instructions Manual

Other Operations
6
After completing settings, press the MENU button
to return to the normal display.
To return to operating mode:
÷ To return to normal operation from the [POWER
MANAGEMENT] function's standby mode, either operate
your computer or press the STANDBY/ON button on
this unit or the remote control unit once.
÷ To return to normal operation from the [AUTO POWER
OFF] function's power off condition, press the STANDBY/
ON button on the unit or on the remote control unit.

Setting the Orbiter (ORBITER)

The function gradually moves the display position of the
screen after a set amount of time (approximately every 8
minutes, the screen position is moved at random
horizontally or vertically).
When displaying a still image, setting [ORBITER] to [ON]
helps prevent the screen from being burnt with a lag image.
÷ This function is not supported when using the
multiscreen function or menu display.
MENU
5/∞
2/3
SET
Display operating panel
1
Press the MENU button to display the menu
screen.
STANDARD
PICTURE SCREEN
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
MPEG NR
DNR
CTI
PICTURE RESET
SET ENTER
46
EN
MENU
2/3
SET
5/∞
Remote control unit
INPUT1
SETUP OPTION
:
0
:
0
:
0
:
0
:
0
:
MID
:
MID
:
ON
MENU EXIT
2 Use the 2/3 buttons to select [OPTION].
STANDARD
PICTURE SCREEN
LANGUAGE
ENERGY SAVE
POWER MANAGEMENT
AUTO POWER OFF
ORBITER
MASK CONTROL
INPUT1 SELECT
SR + MODE
ENTER
SET
3
Use the 5/∞ buttons to select [ORBITER], and
press the SET button.
STANDARD
PICTURE SCREEN
LANGUAGE
ENERGY SAVE
POWER MANAGEMENT
AUTO POWER OFF
ORBITER
MASK CONTROL
INPUT1 SELECT
SR + MODE
ENTER
SET
4 Press the 2/3 buttons to activate the setting.
ORBITER
SET
SET
The factory default setting is [OFF].
Each time the button is pressed, the setting alternates
as follows:
3 OFF 2
3 ON 2
5
Press the SET button.
[ORBITER] is set, and you return to the display shown
in step 3.
6
After completing settings, press the MENU button
to return to the normal display.
Note
The [ORBITER] setting affects all input sources.
INPUT1
SETUP OPTION
:
ENGLISH
:
STANDARD
:
OFF
:
DISABLE
:
OFF
:
ON
:
D-SUB
:
OFF
EXIT
MENU
INPUT1
SETUP OPTION
: ENGLISH
:
STANDARD
:
OFF
: DISABLE
:
OFF
: ON
: D-SUB
:
OFF
EXIT
MENU
:
OFF
EXIT
MENU