Pioneer Elite PRO-110FD Operating Instructions Manual page 92

Enjoying through External Equipment
12
Setup
Software Update
To check whether the software needs to be updated or not.
Home Media Gallery must be connected to a USB device.
Connect the USB device and press the Next button.
Current Version: 1.x.xx
Note
• Be sure to check that the version of the software has been
changed by comparing with the one written down after
updating the software (the procedure to check it is the same as
above.). If it has not changed, the update may have failed.
Please attempt the update again (the existing software can be
used if the update fails). If you still cannot update the software
after retrying, the file may have been damaged. Please return
to the procedure for Downloading the software for update.
• On average, it may take 15 minutes or more to complete a
software update.
• If you attempt a software update during the multiscreen mode,
the single screen automatically returns.
"Auto Connection Setup"
For extra convenience, you can toggle between the following
features:
"Last Connected When you check in the "Last Connected Server"
Server"
box, the plasma display accesses the last server
using WOL ("Wake On LAN") first as the Media
Navigator is selected from the Home Media
Gallery. The Media Navigator displays the last
server when WOL succeeds, while a server list is
displayed when WOL fails.
WOL is activated to turn the last accessed server
On if the server is WOL-compliant and is in
Standby or sleep mode.
"Single Server/ This function is used only when a USB flash drive
USB"
or a single server is connected. You do not need
this function when a multi-card reader, or two or
more servers are connected.
USB:
• When USB flash drive is connected, the Devices
List is skipped as long as you have checked in
the "Single Server/USB" box. If not, the list may
be displayed at any time.
Media Navigator (Server):
• When a single server is connected, the Server
List is skipped as long as you have checked in
the "Single Server/USB" box. If not, the list may
be displayed at any time. When the "Last
Connected Server" box is checked, the other
server setup option – "Single Server/USB" –
becomes invalid.
92
En
Next Cancel
1
Setup
Auto Connection Setup
Last Connected Server
Single Server/USB
OK
Dialog Screen Message
No. Message
001 Content playback failed
(001).
100 A communication error
occurred (100).
101 No response from the
server (101).
102
Disconnected from the
network (102).
103 Invalid response was
received from the
server (103).
300 This format is not
supported (300).
500
Authorization failed
(500).
501
Authorization failed
(501).
503 Authorization failed
(503). Please check for
trouble in routers,
hubs, and other
network devices.
504
Authorization failed
(504). The maximum
allowed number of
devices are connected
to the server.
505 Authorization failed
(505). The content
license is off. Please
turn on the license
from the server.
• The message consists of "Error", "Warning" and "Information" and is
displayed for 5 seconds.
Displaying pictures in the Home Media Gallery for an
extended period may cause an after-image.
Cancel
1
Problem
No details are available
for the error
No further details are
available for the error
Timeout period reaches
due to delayed server
response
Cables are
disconnected
Invalid response from
the server
A file that is not
supported is selected
Failed to obtain
WMDRM authorization
Failed to obtain
WMDRM authorization
Failed to obtain
WMDRM authorization
Failed to obtain
WMDRM
Failed to obtain
WMDRM authorization