Using The Hdmi Control; Using The Hdmi Control Functions - Pioneer Elite PRO-110FD Operating Instructions Manual

Using the HDMI Control

13
Chapter 13
Using the HDMI Control

Using the HDMI Control functions

You can operate such Pioneer devices as a recorder, player or AV
system support the HDMI Control functions using the remote
control of the plasma display.
The HDMI Control functions include playback of content using
on-screen control panel on the plasma display. For details, see
the table below.
Note
• Maximum number of devices that can be connected and
controlled using the remote control unit of the plasma display
is as follows: recorder x 2, player x 2, AV system x 1.
• Not all device operations may be available for HDMI Control
functions.
HDMI Control functions
Function Description
Playback of
The proper input source is automatically selected
and the content is played back on the plasma
content
display as you press PLAY on the connected device
On-screen Recorder/player operation can be controlled on-
screen or with the remote control unit of the
control
plasma display (play, stop, fast forward/reverse,
etc.)
Display Information on the display menu language is
transferred to the recorder or player connected to
Language
the plasma display. For details, see the operation
Setup
manual that came with the recorder or player.
AV system
Receiver/amplifier operation can also be controlled
with the remote control unit of the plasma display
control
(volume, surround mode and input selection of the
HDMI terminal)
Power On The plasma display can be turned On when the
connected recorder(s) or player(s) is turned On and
images are input to the plasma display.
Power Off
The connected device(s) can be turned Off when
the plasma display is turned Off
94
En
Usable
devices
Note
Recorder/
• When using the HDMI Control functions, operate the remote
player
control unit while pointing it toward the remote control sensor
(t) located at the bottom right of the front panel of the plasma
Recorder/
display.
player
• You cannot use two or more HDMI terminals at the rear of the
plasma display at the same time except "Power Off" and
"Display Language Setup" functions.
Recorder/
player
AV system
Recorder/
player
Recorder/
player/AV
system
• Press VOL +/– or e to adjust volume
for the AV system.
• Press , , , , ENTER, RETURN
) or color (BLUE, RED, YELLOW,
(
GREEN) buttons to use functions such
as the disc navigator on the connected
recorder or player.