Digital Connections - Sanyo MPX-CD163 Instruction Manual

CONNECTIONS

Digital connections

A Digitally connecting four multiplexers
Up to four of these units can be connected for monitoring.
By connecting several units, up to 64 cameras can be viewed with one main monitor. Also, by connecting a recorder to each
multiplexer, playback of recorded images can be viewed on the main monitor.
* For the MPX-CD93 model, the total number of cameras that can be viewed with one monitor is 36, nine to each unit.
Use straight-type CAT-5 RS485 cables (sold separately) to connect the DIGITAL IN connectors to the digital output connectors of
other devices.
Use cables with a length of 3 m or less.
Main monitor
(sold separately)
or
Digital video recorder Time lapse VCR
(sold separately) (sold separately)
or
Digital video recorder
Time lapse VCR
(sold separately)
(sold separately)
or
Time lapse VCR
Digital video recorder
(sold separately) (sold separately)
or
Digital video recorder
Time lapse VCR
(sold separately)
(sold separately)
Note: (Main unit and sub-units)
Main unit and sub-units must be specified. Distinguishing a main unit and sub-units enables the main unit to display the camera
images of a sub-unit on the monitor. (See page 50.)
Since no video signal is output from the main monitor output connector on the rear panel of a sub-unit, if a monitor is connected the
screen will be black.
If these connections have been made, a digital video recorder cannot be connected digitally.
English
1 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16
TV monitor
17 – 32
33 – 48
49 – 64
1 – 16
DIGITAL
IN
Cable (straight-type CAT-5, 3 m or less)
DIGITAL OUT
DIGITAL
IN
DIGITAL OUT
DIGITAL
IN
DIGITAL OUT
– 9 –
Main multiplexer
Sub 1
Sub 2
Sub 3