Dc Power Cable; Removing The Dc Power Cable; Replacing The Dc Power Cable - Dell LATITUDE E6400 XFR Service Manual

34 DC Power Cable

34.1 Removing the DC Power Cable

CAUTION: Before you begin any of the procedures in this section, follow the safety
instructions that shipped with your computer.
1. Follow the instructions in Before Working on Your Computer.
2. Remove the palm rest(see Removing the Palm Rest).
3. Disconnect the DC power cable from the system board.
4. Unroute the DC power cable from the base assembly. Pry up the DC power connector to release the double-
stick adhesive tape on the bottom of the connector, and then lift the DC power connector out of the base
assembly.

34.2 Replacing the DC Power Cable

CAUTION: Before you begin any of the procedures in this section, follow the safety
instructions that shipped with your computer.
Page 65
™
Dell Latitude™ E6420 XFR Service Manual
2
1 DC power connector 2 DC cable connection point to system board
1