Dell LATITUDE E6400 XFR Service Manual page 77

Option
OROM Keyboard
TPM Security
Computrace (R)
CPU XD Support
Non-Admin Setup Changes
Password Configuration
Admin Setup Lockout
Performance
Option
Multi Core Support
Intel SpeedStep
C-States Control
Limit CPUID
Intel TurboBoost
HyperThread Control
Page 77
™
Dell Latitude™ E6420 XFR Service Manual
Description
Access Allows you to set an option to enter the Option ROM Configuration screens
using hotkeys during boot. The options are:
• Enable
• One Time Enable
• Disable
Default Setting: Enable
Allows you to enable the Trusted Platform Module (TPM) during POST.
Default Setting: Disabled
Allows you to activate or disable the optional Computrace software. The options are:
• Deactivate
• Disable
• Activate
Default Setting: Deactivate
NOTE: The Activate and Disable options will permanently activate or disable
the feature and no further changes will be allowed.
Allows you to enable the Execute Disable mode of the processor.
Default Setting: Enabled
Allows you to determine whether changes to the setup options are allowed when an
Administrator Password is set. If disabled, the setup options are locked by the admin
password.
Default Setting: Disabled
Allows you to determine the minimum and maximum length of Administrator and
System passwords.
Allows you to prevent users from entering Setup when an Administrator password is
set.
Default Setting: Disabled
Description
Allows you to enable or disable multi-core support for the processor. The options are:
• All
• 1
• 2
Default Setting: All
Allows you to enable or disable the Intel SpeedStep feature.
Default Setting: Enabled
Allows you to enable or disable the additional processor sleep states.
Default Setting: The options C states, C3, C6, Enhanced C-states, and C7 options are
selected/enabled.
Allows you to limit the maximum value the processor Standard CPUID Function will
support.
Default Setting: Enable CPUID Limit
Allows you to enable or disable the Intel TurboBoost mode of the processor.
Default Setting: Enabled
Allows you to enable or disable the HyperThreading in the processor.
Default Setting: Enabled