term
D
Cordless DECT
Document Revision 1
___________________________________________________________________________________
Figure 2-4 Base Coverage Area
5.3
Test the Location
To test the location, plug the AC adapter into the repeater, then hold the
repeater in the place where you plan to mount it. The LED should remain on
and steady, indicating that the repeater has a good signal from the base.
If the LED flashes, the repeater is not getting a good signal. The repeater may
be too far away from the base, there may be interference from electronic
devices, or the signal might be blocked by thick walls or metal objects. Try
moving the repeater to another location.
___________________________________________________________________________________
Repeater Guide
2 - 7