Table of Contents
Advertisement
Document Revision 1
___________________________________________________________________________________
S
5
I
ECTION
NSTALLING THE
5.1
5.2
___________________________________________________________________________________
2 - 6
R
EPEATER
Finding the Right Location
To get the best operating conditions for the repeater, it is important to place it
correctly. Here are a few tips for placing repeaters:
Place the repeater as high as possible, but at least 6 feet off the ground.
Make sure you have good reception from the base.
Make sure the location is close to a standard 120 V AC power outlet.
Never install electrical cords across a traffic area: they can create a trip
hazard or become damaged and create a fire or electrical hazard.
Allow at least 35 feet between repeaters (if you are installing repeaters
across multiple floors, remember to allow 35 feet vertically, also).
Avoid sources of electrical interference, such as hi-fi systems, office
equipment or microwave ovens.
Avoid heat sources and direct sunlight.
Avoid things that can interfere with radio signals, such as metal doors,
thick walls, niches and cupboards.
Map the Base Coverage Area
To find the best location for the repeater, you need to determine the base
coverage area. Stand near the base and make a call. Walk away from the
base with the handset, and make a note where the signal becomes weaker.
The optimum location for the repeater is as far from the base as possible while
still maintaining a "good" signal, or just inside the location where the signal
became weaker.
term
D
Cordless DECT
Getting to Know Your Repeater
Advertisement
Table of Contents
