Chapter 3 Basic Settings 3.1 Initial Settings - NEC PX-TUAN-01 Manual

Chapter 3 Basic Settings
3.1 Initial Settings
The PX-TUAN-01 has been designed to comply with the plug and play principle. It's very
easy to set up due to several smart and unique features. If you are connected to a cable
network (providing ACI information) the tuner will automatically recognize the ACI information
during scanning and program the tuner according to the list as provided by the cable operator.
If no ACI information is available, the tuner will detect most channel names from Teletext
information, if available, and copy them into the channel label table.
Remark:
For your convenience the Tuner remote control unit has double functions (NEC Plasma Display +
Tuner mode). In the initial setting procedure we recommend to use your actual NEC remote control to
operate the display and to use the Tuner remote control only to operate the Tuner. After setting up has
been successfully completed you may find it more convenient to operate your NEC display with the
Tuner remote control.
After having made the connections, as described in 2.2, follow the following steps:
-1- Install the supplied AAA batteries into remote control.
-2- Make sure the power main switch on the tuner box is in "ON" position.
Press the "ON" key on the remote control. Both Display and Tuner are operated by this command
(be sure that power LED of Display and Tuner are both "Green")
-3- Select the appropriate Input of your NEC display and this will display the blue background picture
generated by the PX-TUAN-01.
-4- Press "Tuner" key on the remote control. On the blue screen the text "Tuner" will appear.
If this is NOT the case, don't go to next point but double check all previous steps.
-5- The default OSD language is English. If this is your desired language go to the next point.
If you prefer another language, press the Yellow key on the remote control and select desired
language from the OSD it with "▲" or "▼" key and confirm with pressing the "OK" key.
-6- The default TV system is PAL BG (for most of continental Europe). If this is OK go to next point.
If your TV system is PAL-I (UK, Ireland) or SECAM (France and other countries), press the BLUE
key and select desired standard with "▲" or "▼" key and confirm with the "OK" key. The tuner
will automatically change the A/V settings (for ALL channels) and load the correct programmed
channel table (see section 5.3).
-10-
PX-TUAN-01 Instruction Manual