Replacing The Battery Pack - NEC VERSA 4000 Manual

When battery power gets low, do either of the following:
Put your system in Suspend mode, remove the battery
pack, and replace it with a fully charged Li-Ion battery.
Leave the battery pack in the system and connect your
NEC Versa to the AC adapter and a wall outlet. If you
connect the system to AC power and continue to use it,
the battery recharges in 2.5 to 7 hours. If you connect
the system to AC power and do not use it, the battery re-
charges in about 2.5 hours.
You can also buy an optional battery charger to quickly
charge your battery. See the online Options Catalog.
To prevent accidental battery ignition or explosion,
adhere to the following:
Keep the battery away from extreme heat.
Keep metal objects away from the battery termi-
nals to prevent causing a short circuit.
Make sure the battery is properly installed in the
battery bay.
Read the precautions printed on the battery and
in the online Basics .

Replacing the Battery Pack

Replace the battery pack installed in your NEC Versa sys-
tem as follows.
Turn the NEC Versa over so that it is upside down with
1.
the front of the system facing you.
2-4 Using the Hardware
!
WARNING