Preparing The Nec Versa For Docking - NEC VERSA MINIDOCK 6000 Manual

PREPARING THE NEC VERSA FOR DOCKING

Follow the procedure given next to prepare the NEC Versa for docking.
Set NEC Versa power for your system as follows.
1.
T
If you have a Plug and Play NEC Versa, you can either put your sys-
tem into Suspend mode or leave it in full Operation mode for docking.
For example, an NEC Versa with Windows 95 running is a Plug and
Play system.
T
If you have a non-Plug and Play system, turn off system power before
docking. Systems running Windows for Workgroups or Windows NT
do not support plug and play.
NOTE
docking.
If you are running the NEC Versa on AC power, disconnect the AC
2.
adapter cable from the NEC Versa.
NOTE
open applications to avoid data loss.
3. On the back of the NEC Versa, open the expansion port cover and slide it
underneath the expansion port.
Check that all other NEC Versa port covers are closed.
2-4 Docking and Undocking
Make sure your system is in the appropriate mode for
Before disconnecting power, save any open files or close