NEC VERSA MINIDOCK 6000 Manual page 24

NOTE
Keep the NEC Versa straight. If the computer is pushed at an
angle, it does not dock properly.
If using the NEC Versa without an external monitor, open the LCD
7.
panel.
8. Press the Power button on the side of the MiniDock to power on the NEC
Versa. When the Docking Status LED lights a steady green, the docking
process has successfully completed and the NEC Versa is powered on.
T
If no LEDs are lit, press the Main Power switch on the back of the
MiniDock to power on the MiniDock. Next, press the Power button
on the side of the MiniDock to power on the NEC Versa.
T
If the Docking Status LED blinks green, push a little harder on the
NEC Versa to reseat it for docking. This usually corrects the problem
and the LED will light a steady green.
Opening the LCD panel
Docking and Undocking 2-9