The LED continues to blink green when something went wrong with
the docking sequence due to an error or hardware failure. Proceed as
follows:
NOTE
resentative.
Once docked, the NEC Versa is locked onto the MiniDock and cannot be
removed without following the appropriate undocking procedure.
2-10 Docking and Undocking
Press the Eject lever to eject the NEC Versa from the MiniDock.
Check that the Docking Status LED is amber.
Starting at step 2 in this procedure, try redocking the system.
If the LED continues to blink, call your authorized service rep-
Powering on