Installing A Device In The Versabay Iii - NEC VERSA SX User Manual

Note:
completely removing the device, the device casing
catches on the inside of the latch.

Installing a Device in the VersaBay III

Use the following steps to install a device in the VersaBay III. These
steps show how to install the 24X CD-ROM reader that ships standard
with the system. Use these steps to install other devices as well.
Note:
VersaBay III is specified as a master.
Your system must be powered off before removing or inserting devices
in the VersaBay III.
1. Make sure the NEC Versa is powered off, all options are
disconnected, and the LCD panel is closed.
2. Turn the system upside down.
3. Locate the VersaBay III release latches on the bottom of the unit.
4-10 Using the Hardware
If you release the front latch before
Removing the device
A CD-ROM reader installed in the