Continue to hold the battery release latch as you slide the battery out of the system.
3.
Replace the battery pack as follows:
4.
Locate the alignment groove on the edge of the battery.
!
Locate the alignment groove inside of the battery bay.
!
Align the grooves on the battery with the grooves in the bay.
!
Slide the battery into the battery bay until securely locked into place.
!
VersaBay III Device
Use the following steps to remove a device from the NEC VersaBay III.
Close the LCD panel and turn the system over.
1.
Locate the NEC VersaBay III release lock and release latch on the bottom of the unit.
2.
Removing the battery
Inserting the battery
Disassembly and Reassembly 3-5