NEC VERSA LXi Service And Reference Manual page 40

Use the Power Management Setup to balance high performance and energy conservation.
Parameter
System Switch
Power Management
under AC
Power Savings Level
1
CPU Speed Control
1
Hard Disk Timeout
1
Video Timeout
1
Peripheral Timeout
1
Audio Device Timeout
1
Standby Timeout
1
Auto Suspend Timeout
LCD Suspend
Suspend Option
Auto Save-to-File
Panel Brightness
Suspend Warning Tone
Remote Power On
Wake Up Alarm
2
Resume Alarm Time
Intel SpeedStep
technology
1
Available when power savings is set to Custom
2
Resume alarm time is selectable when wake up from suspend alarm is set
System Switch — Sets the Power button as a power switch or a sleep button.
!
Power Management Under AC — Specifies whether to enable power management
!
features when AC power is in use. When AC power is connected to your NEC Versa
system, power management is usually disabled. If you enable this parameter, the system
automatically activates the power management profile you set, even when AC power is
used.
Power Savings Level — Specifies one of four levels of power management.
!
High Performance — Provides good battery life and best performance with only
minimal power conservation Use while on the road or traveling short distances.
Longest Life — Provides best battery life, the maximum amount of power savings,
and good performance. Use while traveling long distances.
Power Management Setup
Default Alternate Setting(s)
Setting
Power Button Sleep Button
Off On
Longest Life High Perform/Custom/Off
100% 12.5, 25, 50%
2 minutes 5/30/45 sec; 1/4/6/8/10/15 min.
Off
2 minutes 30/45 sec.; 1/4/6/8/10/15 min.
Off
On Off
On Off
4 minutes Off/1/2/6/8/10/15 min.
10 minutes Off/5/15/20/25/30 min.
Disabled Enabled
Suspend STF
Enabled Disabled
Auto User Defined
Enabled Disabled
Disabled Enabled
Disabled Enabled
Off Set time in 5 min. increments when
Wake Up Alarm is set.
Automatic Disabled, Battery Opti
.
System Configuration and Setup 2-19
.