Memory Modules - NEC VERSA LXi Service And Reference Manual

Memory Modules

Use the following steps to remove a memory module from the system or install a memory
module.
from yourself and your clothing by touching a nearby metal surface.
Close the LCD panel and turn over the system. Locate the memory module bay.
1.
A – Screw
Loosen the screw and remove bay cover.
2.
Locate the SO-DIMM and proceed as follows:
3.
Press the locking tabs away from the sides of the SO-DIMM and hold while gently
!
lifting on the edge of the SO-DIMM.
When the edge of the SO-DIMM pops up and is at approximately a 60 degree angle,
!
pull the SO-DIMM from the socket.
Before handling any internal components, discharge static electricity
Locating the memory module bay
B – Memory Module Bay Cover
Removing an installed SO-DIMM
Disassembly and Reassembly 3-7