Memory Modules - NEC Versa LXi Service And Reference Manual

Memory Modules

Use the following steps to remove a memory module from the system.
from yourself and your clothing by touching a nearby metal surface.
1. Close the LCD panel and turn over the system. Locate the memory module bay.
A – Screw
2. Remove the screw and bay cover.
3. Remove the SO-DIMM as follows:
!
!
Before handling any internal components, discharge static electricity
Locating the memory module bay
Press the locking tabs away from the sides of the SO-DIMM and hold while gently
lifting on the edge of the SO-DIMM.
When the edge of the SO-DIMM pops up and is at approximately a 60 degree angle,
pull the SO-DIMM from the socket.
Removing an installed SO-DIMM
B – Memory Module Bay Cover
Disassembly and Reassembly 3-13