4.
Disconnect the diskette drive cable from connector P4 on the main board.
5.
Disconnect the bridge battery cable from connector P1 on the main board.
6.
Remove the main board from the system.
Bridge Battery
Use the following steps to remove the bridge battery from the system.
1.
Remove the keyboard, front cover, top cover, and LCD panel from the system.
2.
Disconnect the bridge battery cable from connector P1 on the main board. Carefully pry the
bridge battery up and remove it from the system.
Fan Assembly
Use the following procedure to remove the fan assembly.
Remove the keyboard, front cover, top cover, LCD panel, audio board, and main board
1.
from the system.
3-26 Disassembly and Reassembly
Removing the bridge battery
A – Bridge Battery