Using The Nec Customize Utility; Hdprepez Utility; Using Hdprepez In Windows 98 Or 95; Using Hdprepez With Windows Nt - NEC Versa LXi Service And Reference Manual

Using the NEC Customize Utility

Follow these steps to use the NEC Customize utility.
Double click the NEC Customize icon.
1.
From the display window, select the desired option.
2.
Click Launch to initiate the selected option.
3.
Follow the on-screen instructions to process the selected option.
4.
For some of the selected options you are prompted to reboot your system.
If necessary, click Exit to close the NEC Customize dialog box.
5.

HDPREPEZ Utility

The power management state referred to as Save-To-File (STF) saves the system's current
working environment to the system's hard drive, then powers down the system to conserve
battery power. The HDPREPEZ function creates a file large enough (256 MB) to accommodate
the entire memory contents of your system. The STF file is created the first time that you run
your system's setup program.
Note
NECUTILS/HDPREP directory.

Using HDPREPEZ in Windows 98 or 95

In Windows 98 or 95, run the HDPREPEZ Utility if you increase the memory capacity in your
NEC Versa beyond the factory installed base memory or if you install a generic Windows 98 or
95 operating system.
Follow these steps to run the HDPREPEZ utility.
Power off and restart your NEC Versa.
1.
At the statement "Starting Windows 98 (or 95)," press
2.
From the Startup menu, select the "Safe Mode Command Prompt Only" option.
3.
Enter MS-DOS. At the c: prompt, type
4.
the \necutils\hdprep directory.
Type
5.
the newly installed memory.
Power off your system and then power on. A file, large enough to accommodate your
6.
system's memory is created on the hard disk drive.

Using HDPREPEZ with Windows NT

If you install a generic Windows NT operating system on your NEC Versa VX, use the
Application and Driver CD to load the HDPREPEZ utility to increase the size of or to create the
STF file. Follow the instructions on the Application and Driver CD to run the HDPREPEZ
utility.
For more details about the HDPREPEZ Utility, see the HDPREPEZ.TXT file in the
and press
HDPREPEZ
cd \necutils\hdprep
. The utility automatically prepares your NEC Versa for
Enter
System Configuration and Setup 2-27
.
F8
and press to change to
Enter