System Security Setup - NEC Versa LXi Service And Reference Manual

!
LCD Panel View Expansion — Specifies whether the panel view is reduced/off or
expanded/on.
!
PS/2 Port Warm Swap — Specifies whether or not you can swap a PS/2 device during
system suspension.
!
Internal Mouse — Specifies whether or not you can use both the internal and the
external mouse.
!
Graphics Aperture Size — Selects the graphics aperture size used by the AGP video
device, a memory window that optimizes access to accelerated graphics memory.

System Security Setup

Use the System Security Setup to establish system passwords.
Parameter
Assign Supervisor
Password
Assign User Password
Boot Password Required
Resume Password
Required
Assign HDD Password
Internal HDD password
VersaBay HDD Password
DS Internal HDD
Password
DS VersaBay HDD
Password
1
These setup items are only visible when system is docked.
!
Assign Supervisor Password — Establishes password protection for entering the BIOS
Setup utility on the system. Pressing
password is entered.
!
Assign User Password — Establishes a user password once a supervisor password is set.
!
Boot Password Required — Indicates whether or not a password is required during
system boot.
!
Resume Password required — Indicates whether or not a password is required during
system resume. Boot Password must be defined to activate this parameter.
!
Assign HDD Password — Allows you to assign a password to allow or restrict access to
the hard disk drive contents.
!
Internal HDD Password — Enables or disables the HDD password.
!
VersaBay HDD password — Enables or disabled the VersaBay III password.
!
DS Internal HDD Password — Enables or disables the HDD password for the docking
station's internal hard disk drive.
System Security Setup
Default Setting
Press Enter
Press Enter
No
No
Press Enter
Disabled
Disabled
Disabled
1
Disabled
1
Alternate Setting(s)
Yes
Yes
Enabled
Enabled
Enabled
Enabled
- - locks the keyboard until the
Ctrl Alt Backspace
System Configuration and Setup 2-15