Speaker Assembly
Use the following steps to remove the speaker assembly from the system.
Remove the keyboard and front cover from the system.
1.
Locate and remove the six screws securing the speaker assembly.
2.
3.
Remove the speaker assembly.
VersaGlide Assembly
Use the following procedure to remove the VersaGlide assembly from the system.
1.
Remove the keyboard and front cover from the system.
2.
Turn over the front cover.
3.
Locate and remove the two screws securing the VersaGlide assembly to the front cover.
A – Screw
Disconnect the VersaGlide assembly cable from the LED status board.
4.
Remove the VersaGlide assembly.
5.
Removing the speaker screws
A – Screw
Removing the VersaGlide screws
B – VersaGlide Assembly
Disassembly and Reassembly 3-19