Nec Utilities; Nec Customize Utility; Nec Customize Utility Screen - NEC Versa LXi Service And Reference Manual

7. Remove the diskette and press any key to continue. The utility updates the BIOS.
Power off your computer. The next time you power on your computer, you will have the
latest NEC Versa LXi computer BIOS revision level.
Power on your computer. A CMOS Checksum error message appears and prompts you to
8.
press
9. Press
Be sure to modify any custom settings that you may have configured.
10.
11. Disable the BIOS flash switch. Change switch 5 back to "OFF" after completing the BIOS
update. For details about enabling and disabling the BIOS flash switch, see the section
earlier in this chapter, "Enabling the BIOS Flash Switch."

NEC Utilities

NECC provides several programs and routines designed to make your NEC Versa run more
efficiently.
The NEC utilities include:
!

NEC Customize utility

!
HDPREPEZ utility
NEC Customize Utility
In Windows 98 systems, Windows 95 systems, and Windows NT systems, the NEC Customize
utility gives you the option to install or launch:
!
NEC custom wallpaper (Windows 95, only) — Use this option to install wallpaper
displaying the NEC logo.
!
Application and Driver CD — Installs software applications, drivers, etc.
!
NEC VersaBay III Swap utility (Windows 98 and 95, only) — Takes advantage of
warm swapping your VersaBay III devices.
!
IR Setup utility to enable the IR port (Windows 95 only) — Enables the IR port.
!
NEC-supplied mouse driver (Windows NT only) — Takes advantage of the VersaGlide
features.

NEC Customize Utility Screen

The NEC Customize utility screen consists of the following.
!
A window at the top half of the screen lists the available options.
!
The window below the options list displays a description of each option when the option
is highlighted.
!
The Launch button initiates a selected option when clicked.
!
The More Info button provides an overview of the NEC Customize utility.
!
The Exit button closes the NEC Customize utility.
2-26 System Configuration and Setup
F1 to enter Setup.
F1 to enter Setup and restore the default parameter settings.