Top Cover and LCD Panel
Follow this procedure to remove the top cover and LCD panel from the system.
Remove the keyboard and front cover from the system.
1.
Close the LCD panel and turn the system over.
2.
Locate and remove the screw from the file bay. Remove the device from the file bay.
3.
Locate and remove the three screws securing the top cover to the system.
4.
5.
Turn the system over and open the LCD panel.
6.
Locate and remove the screws securing the keyboard heat plate assembly. Remove the heat
plate assembly.
7.
Disconnect the LCD cable from connector P2 on the main board.
Removing the bottom top cover screws
A – Screw
Removing the heat plate assembly screws
A – Screw
Disassembly and Reassembly 3-23