Switch Settings; Front Cover - NEC Versa LXi Service And Reference Manual

Switch Settings

A six-position dip switch is located underneath the keyboard. The following list identifies each
switch setting and its function.
!
Switch 1, Password Override Switch — The default setting is "OFF." If you forget your
password and cannot access the data on your NEC Versa, change the setting to "ON"
and your current password is erased.
!
Switch 2 — Keyboard select; Default is "ON" for U.S. 85 key keyboard.
!
Switch 3 — Reserved for factory use; Default is "ON."
!
Switch 4 — Keyboard select; Default is "ON" for U.S. 85 key keyboard.
!
Switch 5 — BIOS flash enable; Default is "OFF" (disable). Before updating your BIOS,
change the setting to "ON."
!
Switch 6 — Logo select; Default is "OFF" for U.S.

Front Cover

Use the following procedure to remove the front cover from the system.
from yourself and your clothing by touching a nearby metal surface.
Remove the keyboard and VersaBay III device.
1.
Close the LCD panel and turn the system over.
2.
Default switch settings
Dip switches 2, 3, and 4 set to "On."
Before handling any internal components, discharge static electricity
Disassembly and Reassembly 3-17