Switch Settings - NEC VERSA LXi Service And Reference Manual

Disconnect the keyboard cable from connector P6 on the main board and remove the
4.
keyboard.

Switch Settings

A six-position dip switch is located underneath the keyboard. The following list identifies each
switch setting and its function.
Switch 1, Password Override Switch - The default setting is "OFF." If you forget your
!
password and cannot access the data on your NEC Versa, change the setting to "ON" and
your current password is erased.
Switch 2 - Keyboard select; Default is "ON" for U.S. 85 key keyboard.
!
Switch 3 - Reserved for factory use; Default is "ON."
!
Switch 4 - Keyboard select; Default is "ON" for U.S. 85 key keyboard.
!
Switch 5 - BIOS flash enable; Default is "OFF" (disable). Before updating your BIOS,
!
change the setting to "ON."
Switch 6 - Logo select; Default is "OFF" for U.S.
!
Lifting the keyboard
Default switch settings
Dip switches 2, 3, and 4 set to "On."
Disassembly and Reassembly 3-13