Supported Mezzanine Cards; Fibre Channel Standards Compliance - Dell M8428-K Hardware Reference Manual

A

Supported mezzanine cards

Supported mezzanine cards

The Dell M8428-k currently supports the BR1741M-k 2P mezzanine card.

Fibre Channel standards compliance

The switch module switch meets or exceeds the Fibre Channel standards for compliance,
performance, and feature capabilities as defined in the standards compliance list below.
30
FC-AL-2 INCITS 332: 1999
FC-GS-5 ANSI INCITS 427: (includes the following.)
FC-GS-4 ANSI INCITS 387: 2004
FC-IFR INCITS 1745-D, revision 1.03 (under development)
FC-SW-4 INCITS 418:2006 (includes the following)
FC-SW-3 INCITS 384: 2004
FC-VI INCITS 357: 2002
FC-TAPE INCITS TR-24: 1999
FC-DA INCITS TR-36: 2004 (includes the following)
FC-FLA INCITS TR-20: 1998
FC-PLDA INCIT S TR-19: 1998
FC-MI-2 ANSI/INCITS TR-39-2005
FC-PI INCITS 352: 2002
FC-PI-2 INCITS 404: 2005
FC-PI-4 INCITS 1647-D, revision 7.1 (under development)
FC-FS-2 ANSI/INCITS 424:2006 (includes the following)
FC-FS INCITS 373: 2003
FC-LS INCITS 433: 2007
FC-BB-3 INCITS 414: 2006 (includes the following)
FC-BB-2 INCITS 372: 2003
FC-SB-3 INCITS 374: 2003 (replaces FC-SB ANSI X3.271: 1996; FC-SB-2 INCITS 374: 2001)
RFC 2625 IP and ARP Over FC
RFC 2837 Fabric Element MIB
MIB-FA INCITS TR-32: 2003
FCP-2 INCITS 350: 2003 (replaces FCP ANSI X3.269: 1996)
SNIA Storage Management Initiative Specification (SMI-S) Version 1.2 (includes the following)
SNIA Storage Management Initiative Specification (SMI-S) Version 1.03 ISO standard
IS24775-2006. Replaces (ANSI INCITS 388: 2004)
Dell M8428-k Hardware Reference Manual
53-1001980-01