Back-Panel Features And Indicators; Connecting External Devices - Dell POWEREDGE EMU01 Hardware Owner's Manual

Back-Panel Features and Indicators

Figure 1-3 shows the controls, indicators, and connectors located on the system's back panel.
Figure 1-3. Back-Panel Features and Indicators
3
2
1
11
1 serial connector
4 NIC2 connector
7 expansion-card slots
10 system identification button

Connecting External Devices

When connecting external devices to your system, follow these guidelines:
• Most devices must be connected to a specific connector and device drivers must be installed before the
device operates properly. (Device drivers are normally included with your operating system software or
with the device itself.) See the documentation that accompanied the device for specific installation
and configuration instructions.
• Always attach external devices while your system is turned off. Next, turn on any external devices
before turning on the system (unless the documentation for the device specifies otherwise).
For information about individual connectors, see "Jumpers and Connectors" on page 121. For information
about enabling, disabling, and configuring I/O ports and connectors, see "Using the System Setup Program"
on page 31.
14
About Your System
4 5 6
2 video connector
5 NIC1 connector
8 power supply 2
11 power supply 1
7
10
8
9
3 USB connectors (2)
6 remote access controller port
(optional)
9 system status indicator