Closing The System - Dell POWEREDGE EMU01 Hardware Owner's Manual

Figure 3-3. Removing and Replacing the System Cover
1 latch

Closing the System

1 Lift up the latch on the cover.
2 Align the cover with the left and right edges of the system and offset it slightly towards the back of the
system, so that the pins on the inner edge of the cover are aligned with the chassis J hooks. See
Figure 3-3.
3 Lower the cover onto the chassis and close the latch.
4 Rotate the latch release lock in a clockwise direction to secure the cover.
1
2 latch release lock
2
3 J hooks
Installing System Components
3
47