Yamaha 01V96i Reference Manual page 141

Reference manual
Hide thumbs Also See for 01V96i:
Table of Contents

Advertisement

MULTI FILTER
Two input, two output 3-band multi-filter
(24 dB/octave).
Parameter
Range
TYPE 1
HPF, LPF, BPF
TYPE 2
HPF, LPF, BPF
TYPE 3
HPF, LPF, BPF
FREQ. 1
28.0 Hz–16.0 kHz
FREQ. 2
28.0 Hz–16.0 kHz
FREQ. 3
28.0 Hz–16.0 kHz
LEVEL 1
0–100
LEVEL 2
0–100
LEVEL 3
0–100
RESO. 1
0–20
RESO. 2
0–20
RESO. 3
0–20
Description
Filter 1 type: high pass, low pass,
band pass
Filter 2 type: high pass, low pass,
band pass
Filter 3 type: high pass, low pass,
band pass
Filter 1 frequency
Filter 2 frequency
Filter 3 frequency
Filter 1 level
Filter 2 level
Filter 3 level
Filter 1 resonance
Filter 2 resonance
Filter 3 resonance
Effects Parameters
FREEZE
One input, one output basic sampler (Available for
internal effects 1 and 2.).
Parameter
Range
REC MODE MANUAL, INPUT
–1000 to
REC DLY
+1000 ms
TRG LVL
–60 to 0 dB
TRG MASK 0–1000 ms
MOMENT,
PLY MODE
CONTI., INPUT
1
START
END
1
LOOP
1
LOOP
0–100
NUM
START
2
[SAMPLE]
END
2
[SAMPLE]
LOOP
2
[SAMPLE]
–12 to +12
PITCH
semitones
FINE
–50 to +50 cents
MIDI TRG
OFF, C1–C6, ALL
1.
0.0~2970.5 ms (fs=44.1 kHz), 0.0~2729.2 ms (fs=48 kHz),
0.0~2970.5 ms (fs=88.2 kHz), 0.0~2729.2 ms (fs=96 kHz)
2.
0~131000 (fs=44.1 kHz, 48 kHz), 0~262000 (fs=88.2 kHz,
96 kHz)
141
Description
In MANUAL mode, recording is
started by pressing the REC and
PLAY buttons. In INPUT mode,
Record-Ready mode is engaged
by pressing the REC button, and
actual recording is triggered by
the input signal
Recording delay. For plus values,
recording starts after the trigger
is received. For minus values,
recording starts before the trig-
ger is received
Input trigger level (i.e., the signal
level required to trigger record-
ing or playback)
Once playback has been trig-
gered, subsequent triggers are
ignored for the duration of the
TRG MASK time
In MOMENT mode, the sample
plays only while the that the
PLAY button is pressed. In CONT
mode, playback continues once
the PLAY button has been
pressed. The number of times
the sample plays is set using the
LOOP NUM parameter. In INPUT
mode, playback is triggered by
the input signal
Playback start point in millisec-
onds
Playback end point in millisec-
onds
Loop start point in milliseconds
Number of times the sample
plays
Playback start point in samples
Playback end point in samples
Loop start point in samples
Playback pitch shift
Playback pitch shift fine
PLAY button can be triggered by
using MIDI Note on/off mes-
sages
01V96i—Reference Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents