Input & Output Patching; Input Patching - Yamaha 01V96i Reference Manual

Input & Output
Patching
This chapter describes how to patch (assign) signal paths
within the 01V96i to its inputs, outputs, and slot channels

Input Patching

Signals input at INPUT connectors 1–16, ADAT IN connec-
tor, 2TR IN DIGITAL connectors, and Slot I/O card are
patched to Input Channels for use.
Patch example:
Input Patching
INPUT connector 1
INPUT connector 2
INPUT connector 3
INPUT connector 4
INPUT connector 5
INPUT connector 6
INPUT connector 7
INPUT connector 8
By default, the Input Channels are patched as follows:
Input Channels Input connectors and Slot channels
1–16 INPUT connectors 1–16
17–24 ADAT IN Input Channels 1–8
25–32 Slot Channels 1–8
ST IN Channels Internal Effects Processor 1–4 Outputs
1–2
1–4
You can change these patches, if you desire.
Input Patching
Follow the steps below to change the Input Patch.
1.
Press the DISPLAY ACCESS [PATCH] button
repeatedly until the Patch | In Patch page
appears.
Input Channel 1
1
Input Channel 2
Input Channel 3
Inputs, ADAT IN channels, TO HOST USB channels, and
Input Channel 4 slot channels that are currently assigned to Input Chan-
nels are shown in the parameter boxes (
Input Channel 5
channel numbers. The parameter indicators are
Input Channel 6
explained below:
Input Channel 7
Parameter value
Input Channel 8
–
AD1–AD16
ADAT1–ADAT8
SL-01–SL-16
FX1-1 & FX1-2
FX2-1 & FX2-2
FX3-1 & FX3-2
FX4-1 & FX4-2
2TD-L & 2TD-R
USB1–USB16
2.
Move the cursor to an input patch parameter
you wish to change, then rotate the Parame-
ter wheel or press the [INC]/[DEC] buttons to
modify the patching.
The long name of the currently-selected channel is indi-
cated in the upper-right corner of the screen (
the channel name is the long name of the selected input
channel (
channel names.)
Input & Output Patching
1
Description
No assignment
INPUT connectors 1–16
ADAT IN Input Channels 1–8
Slot Channels 1–16
Outputs 1 & 2 of Internal Effects
Processor 1
Outputs 1 & 2 of Internal Effects
Processor 2
Outputs 1 & 2 of Internal Effects
Processor 3
Outputs 1 & 2 of Internal Effects
Processor 4
2TR DIGITAL IN (L/R)
TO HOST USB port input channels
1–16
1
2
2
). (See page 28 for information on changing
01V96i—Reference Manual
43
) below the
1
). Below