Options; Sfp Modules; Sfp+ Modules; Compact Flash - Fujitsu XG0224 Hardware Manual

XG0224 Hardware Guide
1.2

Options

1.2.1

SFP Modules

SFP modules (100BASE-FX/1000BASE-SX/1000BASE-LX/1000BASE-ZX/1000BASE-BX-D/1000BASE-BX-U) can
be used.
Precautions
• Turn the switch power off to install a SFP module.
• SFP modules can not be installed in the optional SFP+ extension card.
• 1000BASE-BX-D and 1000BASE-BX-U SFP modules must be used in pairs.
• RJ45 ports 21 through 24 are 'combination' ports that are associated with the 4 SFP ports. Their use is mutually
exclusive. If the RJ45 port 21 is cabled then the associated SFP slot cannot be used.
"2.3.3 Connecting Twisted Pair Cable / SFP Module / SFP+ Module / CX4 Cable" (pg.37)
Reference
User's Guide " SFP Module" (pg.25)
1.2.2

SFP+ Modules

SFP+ modules (10GBASE-SR/10GBASE-LR) are intended for use in the optional extension card.
Precautions
• Turn the switch power off to install a SFP+ module.
• SFP+ modules can not be installed in an SFP slot.
"2.3.3 Connecting Twisted Pair Cable / SFP Module / SFP+ Module / CX4 Cable" (pg.37)
Reference
User's Guide " SFP+ Module" (pg.26)
1.2.3

Compact Flash

SANDISK SDCFJ-256-388 256 MB compact flash card is the only part approved for use in the switch compact flash slot.
Compact flash cards are installed into the compact flash slot on the power inlet side of the switch.
"2.3.4 Installing Compact Flash Card" (pg.40)
Reference
User's Guide " Compact Flash Card" (pg.27)
24
Chapter 1 Getting Started

Options