Brother CT-1200 Operation Manual page 17

EXPLODED VIEW OF AGITATOR ASSEMBLY FOR
REPLACING AGITATOR BRUSHES
Washer
Nut
Screw
HOW TO REPLACE BRUSH ROTOR A
Remove the nut from the agitator shaft
1
by turning counterclockwise. (Fig. 50)
Agitator support A
Then pull out the washer and the agita-
2
tor support A from the agitator shaft.
3 Remove the screw from the brush rotor
A. (Fig. 51)
Brush
rotor A
REPLACEMENT INSTRUCTIONS
Idling pulley
Washer
Main pulley
Agitator shaft
Washer
Brush rotor A
Agitator support A
Washer
Fig.50
Fig.51
Screw
(CT1500 type)
(Left hand screw)
Washer
Brush
Agitator pipe
Brush rotor B
Agitator support B
(CT1500 type)
4
Now the brush rotor A can be easily
removed from the agitator shaft.
(Fig. 52)
After inserting the new brush rotor,
5
reinstall other parts using the reverse
procedure.
Nut
Washer
Fig.49
Brush rotor A
Agitator shaft
Fig.52
17