Operating Instructions - Brother CT-1200 Operation Manual

OPERATING INSTRUCTIONS

HOW TO ATTACH THE HANDLE TO VACUUM CLEANER
1
First remove the handle screw.
Then insert the base of the handle into
the top of the body of the vacuum
cleaner as shown. (Fig. 1)
Make sure the ON/OFF
switch on the handle is
positioned to the front
of the vacuum cleaner.
Note:
Unit should be un-
plugged and power
switch in the "OFF"
position.
HOW TO WIND POWER CORD
Insert the power cord in the clip
1
located on the upper cord storage
hook as shown. (Fig. 3)
HOW TO RELEASE POWER CORD
Rotate the upper cord storage
hook downward for quick cord
release. (Fig. 5)
Upper cord storage hook
6
Handle
Handle screw
Fig.1
Clip
Plug Side
Fig.3
Line up the small hole on the handle with
2
the small hole on the rear of the vacuum
cleaner and insert the screw. (Fig. 2)
Be sure the screw is tightened securely.
Handle screw
2 Wrap excess cord
around the cord stor-
age hooks to prevent
dragging and any in-
terference with clean-
ing. (Fig. 4)
Upper cord
storage hook
Fig.5
Handle
Fig.2
Fig.4