System - D-Link DAP-1562 User Manual

Section 3 - Configuration
Save Settings to
Use this option to save the current access point
Local Hard Drive:
configuration settings to a file on the hard disk
of the computer you are using. First, click the
Save button. You will then see a file dialog, where
you can select a location and file name for the
settings.
Load Settings
Use this option to load previously saved access
from Local Hard
point configuration settings. First, click the Browse
Drive:
button to find a previously save file of configuration
settings. Then, click the Load button to transfer
those settings to the access point.
Restore to
This option will restore all configuration settings
Factory Default
back to the settings that were in effect at the time
Settings:
the access point was shipped from the factory.
Any settings that have not been saved will be lost,
including any rules that you have created. If you
want to save the current access point configuration
settings, use the Save button above.
Note: Restoring the factory default settings will not
reset the Wi-Fi Protected Status to Not Configured.
Reboot the
Click to reboot the access point.
Device:
D-Link DAP-1560 User Manual

System

27