Static Ip - D-Link DAP-1562 User Manual

Section 3 - Configuration
LAN Connection Use the drop-down menu to select Static IP.
Type:
Access Point IP
Enter the IP address of the access point. The
Address: default IP address is 192.168.0.50. If you change
the IP address, once you click Apply, you will
need to enter the new IP address in your browser
to get back into the configuration utility.
Subnet Mask:
Enter the Subnet Mask of your network.
Default Gateway:
Enter the Gateway of your network (usually the
IP address of your router).
Device Name: Enter the Device Name of the AP. It is
recommended to change the Device Name if
there is more than one D-Link device within the
subnet.
D-Link DAP-1560 User Manual

Static IP

21