Section 3 - Configuration
This section will show you how to configure your new D-Link wireless access point using the web-based configuration utility.
1. On the back of the DAP-1560, slide the mode selector
to the right (Bridge Mode).
2. To access the configuration utility, open a web browser
such as Internet Explorer and enter 192.168.0.50 in
the address field.
3. Enter Admin and then enter your password. Leave the
password blank by default.
If you get a Page Cannot be Displayed error, please refer
to the Troubleshooting section for assistance.
D-Link DAP-1560 User Manual
Configuration (Bridge Mode)
Web-based Configuration Utility
36