Panasonic KX-TVA594 Installation Manual page 119

5.
To set the trunk (CO line) features, follow the instructions in "Settings for the trunk (CO line)
features" (5.6 KX-TD500 PBX Programming for Inband Integration).
6.
Set the PBX to send DID numbers to the VPS.
a)
Go to the "2-7 System Option 6" screen.
b)
Enable "67.Sending DID Number to VPS".
Note
• This setting enables the PBX to send DID numbers to the VPS. If you want to use the
features which utilize DID numbers (e.g., Toll Saver, DID Call Routing), you must enable this
setting.
4.5 KX-TD500 PBX Programming for DPT Integration
Installation Manual 119