1.1 Basic System Construction
1.1.5
Installer Equipment and Software Requirements
The installer must use a PC and the KX-TVA Maintenance Console software to configure and
customize the VPS. The PC can be connected via the built-in USB port of the VPS, or can access the
VPS over a local network via the built-in LAN port (KX-TVA200) or an optional LAN Interface Card
(KX-TVA50). Off-site programming is also possible provided an optional Modem Card is installed in
the VPS.
For more information, see Section 3, Installing KX-TVA Maintenance Console.
Installation Manual
17