How To Ping Your Ip Address - D-Link DCS-1000W Manual

A2: There might be wireless transmission interference. Make sure there are no
other wireless devices on the network that will affect the wireless transmission.
Q: The images is of poor quality, how can I improve the image quality?
A1: Make sure that your computers display properties are set to at least 15-bit
color. Usin g 16 or 256 colors on your computer will produce dithering
artifacts in the image, making the image look as if it has bad quality.
A2: The configuration on the DCS-1000W image display is incorrect.
Through the Web Configuration Image section of the web management you
need to adjust the image related parameter for improve images such as
brightness, contrast, hue and light frequency. Please refer to the Web
Configuration section for detail information.
Q: There are no images available through the web browser?
A1: The ActiveX might be disabled. If you are viewing the images from
Internet Explorer make sure ActiveX has been enabled in the Internet Options
menu. Alternatively, you can use the Java Applet for viewing the required
images.
A2: If you are using Windows XP, please make sure that you have
downloaded Java and installed it properly.
A3: Make sure that your web browser supports Java. If you are using Internet
Explorer or Netscape Navigator with a version number of lower than 4, then
you will need to upgrade your web browser software in order to view the
streaming video transmitted by the DCS-1000W.

How to PING Your IP Address

The PING (Packet Internet Groper) command can determine whether a
specific IP address is accessible by sending a packet to the specific address
and waiting for a reply. It can also provide a very useful tool to confirm if the
IP address conflicts with DCS-1000W over the network.
Follow the step-by-step procedure below to utilize the PING command but
first you must disconnect DCS-1000W from the network.
Start a DOS window.
66