Replacing The Lens - D-Link DCS-1000W Manual

Replacing the Lens

Since the DCS-1000W is designed with a CS- mount, the lens equipped with
the DCS-1000W can be replaced with any standard C or CS lens commonly
used within the surveillance industry.
Follow the instructions below to replace the supplied lens with any C or CS
type lens.
1. Unscrew the DCS-1000W lens
2. When using a C-lens, attach the new lens to a CS-C adapter
3. Screw the new lens onto the DCS-1000W. If appropriate, adjust the iris
according to the prevailing light conditions.
4. Refer to Adjusting the DCS-1000W Focus on the previous page.
5. Refresh the web browser and monitor the results from the DCS-1000W.
77