List Of Lcd Screen Menus - NEC MM2000 User Manual

4-1-2. Operating menus
Preparation: Turn on the unit (See page 16).
1
Press the MENU button.
A menu is displayed on the LCD screen.
2
Press the SELECT
As you press the SELECT
3
Press the SELECT
The submenu "BIOS" of "Version" is displayed.
The menu item can be selected by pressing the ENTER button instead of the SELECT
• Press the SELECT
* This is the screen when power has been turned on. The menu of part can be displayed in standby state.
4
Select the submenu "Data" by pressing the SELECT
As you press the SELECT
No." and the version information is displayed.
5
Press the SELECT
Every time the SELECT

4-2. List of LCD screen menus

Menu
Input Source
Information Version
IP Address
Error Code
button to display "Version".
button, the display changes among "Version" ←→ "IP Address" ←→ "Error Code".
button.
button or CANCEL button to go back to the previous status.
button, the display changes in a cycle "BIOS" ←→ "Firmware" ←→ "Data" ←→ "Serial
button for several times.
button is pressed, the display returns to the upper tiers one by one.
Displays the selected slot number, the board name, and type of input signal.
BIOS Displays the BIOS version of the switcher.
Firmware Displays the firmware version of the switcher.
Data Displays the data version of the switcher.
FPGA Displays the FPGA version of the switcher.
Serial No. Displays the Serial number of the switcher.
Displays the IP address of the switcher.
Displays the currently occurring error.
button
button.
Description
4. LCD Menu
19